| Frequently Asked Questions (FAQs) |
|
1. What is the “EMF-Bioshield® ” system?
2. How do you know that the EMF-Bioshield® system works?
3. What is inside the EMF-Bioshield® bulbs? How do they work?
4. Will EMF-Bioshield® harm me? If ELF waves can be harmful, how do I know EMF-Bioshield® won't harm me or combine with the ELF to harm me?
5. How long does the protection from EMF-Bioshield® last?
6. Does EMF-Bioshield® also work for flat screens (LCDs)?
7. And what about laptop computers?
8. Does EMF-Bioshield® replace anti-glare screens?
9. Can you measure the effect of EMF-Bioshield® with a meter?
10. How can EMF-Bioshield® be ordered?
11. What does EMF-Bioshield® cost? |
1. What is the “EMF-Bioshield®” system? |
| The EMF-Bioshield® System, (based on the A_NOX® technology) is made of two small plastic bulbs containing compounds of rare earths, to be placed respectively on the upper left and lower right corners of the CRT. |
2. How do you know that the EMF-Bioshield® system works? |
| Laboratory tests have consistently shown that exposure to a CRT adversely impacts several types of living matter, while exposure to a EMF-Bioshield®-protected CRT is similar to not being exposed to any CRT at all. Comparison tests completed to date have included white rats, fruit flies, cell proliferation, chick embryos, fungus and humans. [1] |
3. What is inside the EMFBioshield® bulbs? How do they work? |
The EMF-Bioshield® bulbs contain some of elements 58 to 71 of Mendeleyev's Periodic Table of Elements, which are combined at various temperatures and in a specific sequence. The exact formula is a trade secret.
All biological tests prove that EMF-Bioshield® works. Because existing radiation meters are not as sensitive to EMF as living matter, [2] only biological models are sensitive enough to allow measuring with certainty the causes of the problem and the way EMF-Bioshield® works. This is not surprising because "... scientists know enough to say that emissions may be hazardous but not enough to explain how or why." [3] |
4. Will EMF-Bioshield® harm me? If ELF waves can be harmful, how do I know EMF-Bioshield® won't harm me or combine with the ELF to harm me? |
| The EMF-Bioshield® bulbs do not originate any ELF waves and can only help, not harm, living matter. They resonate passively in counter-phase with portions of the EMF (both VLF and ELF) generated by CRTs (as long as their positioning on the frame of the screen is done in accordance with the instructions for use). Tests have consistently demonstrated that EMF-Bioshield® virtually eliminates the negative impacts of PEMF on all biological matters, without creating in turn any harmful effect for the living beings exposed to it. |
5. How long does the protection from EMF-Bioshield® last? |
| To be safe EMF-Bioshield® should be replaced after 24 months, regardless of CRT operating hours. Manufacturer research shows EMF-Bioshield® works perfectly until it loses its ability to resonate. It does not wear down gradually like a battery. This same research shows that some EMF-Bioshield® fail after 28 months, but most have functioned longer. Because there is usually some PEMF present even when CRTs are off, EMF-Bioshield® is resonating, generating counterphase waves and therefore in use whenever the bulbs are outside their original aluminum container. |
6. Does EMF-Bioshield® also work for flat screens (LCDs)? |
| All tests conducted with the EMF-Bioshield® system were done first and foremost to protect users of CRT-based computer and TV screens. Additional tests are being conducted to establish scientifically whether flat screens are harmful and whether the EMF-Bioshield® system can protect their users, too. So far, empirical tests conducted with electro-sensitive people have shown that the EMF-Bioshield® system seems to work for them, too, and has improved their working conditions to their satisfaction. The only difference is that the two bulbs that make the EMF-Bioshield® system need to be positioned, respectively, on the lower left and right corners of the screen frame (instead of the upper left and right corners of the screen frame of CRT models). |
7. And what about laptop computers? |
| The answer is the same as above for flat screens, except that since the two bulbs need to be positioned on the two lower corners of the screen frame for the system to protect users, stationary laptops are the best option. Otherwise, the bulbs need to be removed (and safely put away in their protective alluminum tube) each time the laptop is closed, and re-installed every time the laptop is opened, which can quickly prove to be cumbersome. However, for some extra-sensitive people, that it their only option to avoid feeling uncomfortable, or worse, when they use their laptop computer. |
8. Does EMF-Bioshield® replace anti-glare screens? |
| No. EMF-Bioshield® is designed to eliminate the biologically detectable harmful effects of ELF and VLF magnetic field radiation, thought to be the major EMF health concern. Anti-glare screens are generally designed to mitigate glare or contrast. They are comfort accessories. [4] |
9. Can you measure the effect of EMF-Bioshield® with a meter? |
| In the current state of knowledge and development of measuring devices, EMF meters can not currently measure below 10-6 watts/square centimeter. Several scientists believe human cells may be affected at strengths as low as 10-15 watts/square centimeter. S.E.I.C. points to the consistent biological test results, submitted to international scientific meetings, which prove the effectiveness of EMF-Bioshield®. As far as we are aware, EMF-Bioshield® is the only system which has been submitted to such tests and reported in so many publications (see our list of Publications). |
10. How can EMF-Bioshield® be ordered? |
|
If you live in the USA, Canada, Mexico or any country in the Pacific rim, orders can be placed on line by clicking here.
Orders can also be placed by phone with S.E.I.C. in Switzerland:
|
11. What does EMF-Bioshield® cost? |
| US $195.00 (+ S&H + VAT where applicable) |
